0
AK Interactive Dioramas: Resin Stagnant Water Components Epoxy Resin 180ml
$54.99
Resin Stagnant Water Components Epoxy Resin 180ml
1 in stock
Description
AK Interactive Stagnant Water is a two-component coloured epoxy resin kit designed to simulate realistic marshes, ponds, and standing water in scale models and dioramas.
Key Details and Specifications
- Volume: 180ml total (120ml resin and 60ml hardener).
- Mixing Ratio: 2:1 (resin to hardener).
- Inclusions: Two dispensing syringes are included inside the box.
- Curing Time: Approximately 24 hours, depending on room temperature and the depth of the pour.
- Maximum Thickness: Recommended pour depth is up to 5cm.
- Odor: Low odor formula.
How to Use It
- Prepare the Area: Pour the mixture only into a fully sealed, crack-free enclosure so the liquid cannot leak out.
- Measure and Mix: Use the provided syringes to measure out a strict 2:1 ratio (2 parts resin to 1 part hardener). Stir the components thoroughly.
- Avoid Bubbles: Stir slowly and gently to prevent trapping unwanted air bubbles in the liquid.
- Cure: Let the mixture self-level and dry undisturbed for about 24 hours in a dust-free environment.
